Lenovo ThinkPad X230 Tablet User Manual

Page 50

Advertising
background image

Table 7. Status indicators

Indicator

Meaning

1

Speaker mute
indicator

Orange: The speakers are on mute. To mute or unmute the speakers, press the
speaker mute button.

2

Microphone mute
indicator

Orange: The microphones are on mute. By default, when the microphones are on
mute, none of the recording devices is available.

3

Wireless LAN,
WAN, WiMAX, or
Bluetooth status
indicator

Green: The wireless LAN, WAN, Bluetooth, or WiMAX feature is on.

Blinking green: Data is being transmitted.

4

Device access
status indicator

Green: The hard disk drive, solid-state drive, or mSATA solid-state drive is reading
or writing data.

5

Fingerprint reader
status indicator

Green: The fingerprint reader is ready to take fingerprints.

Blinking green once: The fingerprint is being authenticated or has been authenticated.

Blinking green: The fingerprint reader is ready to take fingerprints for power-on
authentication.

Blinking amber: The fingerprint could not be authenticated.

Steady amber for 15 seconds: The power-on authentication feature is going to be
disabled after three bad fingerprint attempts.

6

Power-on indicator

The power button stays lit whenever the computer is on, blinks when the computer is in
sleep mode, and is off when the computer is turned off.

7

Battery status
indicator

Steady green: It indicates one of the following:
• The battery charge level is 80% or higher.
• The battery charge level is between 20% and 80%, and the battery is not charging.

Slow blinking green: The battery charge level is between 20% and 80%, and the
battery is charging.

Steady orange: The battery charge level is between 5% and 20%, and the battery is
not charging.

Slow blinking orange: The battery charge level is between 5% and 20%, and the
battery is charging.

Fast blinking orange: The battery charge level is lower than 5%.

Slow blinking green: The battery charge level is between 20% and 80%, and charging
is continuing. When the battery charge level reaches 80%, the battery status indicator
stops blinking, but the charging might continue until the battery is 100% charged.

44

Hardware Maintenance Manual

Advertising
This manual is related to the following products: