Using the ac power adapter, Charging the battery – Lenovo ThinkPad X140e User Manual

Page 43

Advertising
background image

For Windows 8 and Windows 8.1: Do one of the following:

– Start the Lenovo Support program and click Battery Health.

– Start the Lenovo Settings program and click Power.

Using the ac power adapter

The power to run your computer can come either from the lithium-ion (Li-ion) battery pack provided with it,
or from ac power through the ac power adapter. While you use ac power, the battery charges automatically.

The ac power adapter that comes with your computer has two basic components:

• The transformer pack that converts ac power for use with the computer.

• The power cord that plugs into the ac outlet and into the transformer pack.

Attention: Using an improper power cord could cause severe damage to your computer.

Connecting the ac power adapter

To use the ac power adapter, do the following. Be sure to take these steps in the order in which they are
given here.

1. Connect the power cord to an electrical outlet.

2. Connect the power cord to the transformer pack.

3. Connect the ac power adapter to the power connector of the computer.

Tips on using the ac power adapter

You can check the status of your battery at any time by looking at the battery meter at the bottom of
your display.

• When the ac power adapter is not in use, disconnect it from the electrical outlet.

• Do not bind the power cord tightly around the ac power adapter transformer pack when it is connected to

the transformer.

• Before you charge the battery, make sure that its temperature is at least 10°C (50°F).

• You can charge the battery when the ac power adapter is connected to the computer and the battery is

installed. You need to charge it in any of the following conditions:

– When you purchase a new battery

– If the battery meter at the bottom of your display shows the battery charge is low

– If the battery has not been used for a long time

Charging the battery

When you check battery status and find that the percentage of power remaining is low or when the power
alarm alerts you that the remaining power is low, you need to charge your battery or replace it with a
charged battery.

If an ac outlet is convenient, plug the ac power adapter into it, and then insert the jack into the computer.
The battery will be fully charged in about three to six hours. This is affected by the battery size and the
physical environment. The battery status indicator will let you know that the battery is charging, and will
also notify you when the battery is fully charged.

Note: To increase the life of the battery, the computer does not start recharging the battery if the remaining
power is greater than 95%.

Chapter 2

.

Using your computer

27

Advertising