Lenovo ThinkPad Tablet - Manual (Page 55)

Cable routing: When you install the antenna assembly, route the cables as shown in the following
illustration. As you route the cables, make sure that they are not subjected to any tension. Tension could
cause the cables to be damaged by the cable guides, or a wire to be broken.
a P-sensor antenna (black)
b GPS antenna (green)
b a
Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover, apply the following labels:
10 Homologation label 11 Serial number label
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1 Israel Homo Wireless LAN/Bluetooth label 9 GEO label (for others)
2 Non Encryption label 12 Brazil Anatel 3G label
3 Israel Homo 3G label 13 Brazil Anatel Wireless LAN/Bluetooth label
4 Indonesia Kit label 14 SIRIM 3G label
5 China Wireless WAN label 15 SIRIM Wireless LAN/Bluetooth label
6 China Wireless WAN label (for models with Huawei
EM660 card)
16 Indonesia Postel Wireless LAN/Bluetooth label
7 Wireless WAN MAC address label 17 Indonesia Postel 3G label
8 GEO label (for China)
For the location of each label, refer to the following figure:
Chapter 7 . Removing and replacing a FRU 49