Lenovo IdeaPad S10-3c - Manual (Page 58)

54
IdeaPad S10-3c Hardware Maintenance Manual
Figure 10. Removal steps of system board (continued)
Lift the system board in the direction shown by arrow
2
, unplug the power
assembly connector 3 , and then Remove the system board.
b
2
a a
3
When installing: When attaching the system board to the base cover, adjust
the placement of the wireless radio switch as shown in
b
, and make sure that
both of the audio jack and the microphone jack are attached to the holes on the
base cover as shown in
a
. Improper placement of the switch or those jacks
might cause a damage.