Lenovo IdeaPad Y710 User Manual
Page 45
Chapter 2. Using Your Computer
40
3
Press the Enter key once to move to the Confirm New Password field. Retype the
password you just entered to verify it.
4
Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1
Select Set Supervisor Password, and press the Enter key.
2
Select Enter Current Password and type in the correct password, and press the
Enter key third.
Note:
Make sure the Password on boot is set to Enable if you need the password protection at
power on.
To set a User Password:
1
Turn on your computer. Press F2, while the initial screen is displayed. The BIOS
Setup Utility screen opens.
2
Select Security, using the cursor directional keys.
3
Select Set User Password, and press the Enter key. The Set User Password window
opens.
4
Choose your user password, which can be from one to eight alphanumeric
characters in any combination. Type it in the Enter New Password field.
5
Press the Enter key once to move to the Confirm New Password field. Retype the
password you just entered to verify it.
6
Commit your password to memory, and press the Enter key.
7
Press F10 to exit.
8
Select OK in the Setup Confirmation window.