Lenovo ThinkVision LT1712p Monitor - Manual (Page 21)

Detaching the monitor stand
Gently squeeze both ends of the cylinder and remove in the direction shown. This
allows access to the screws that attach the stand to the monitor
Wall Mounting (Optional)
Refer to the instructions that come with the VESA compatible base mounting kit.
1. Place the monitor face down on a non-abrasive surface on stable flat table.
2. Remove the stand.
3. Attach the mounting bracket from the wall mounting kit to the monitor.
4. Mount the monitor on the wall by following the instructions that come with the
base mounting kit.
NOTE: For use only with UL(expand UL) Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 3.5 kg.
2-9
LT1712p Flat Panel Monitor User’s Guide