Lenovo IdeaPad Y330 - Manual (Page 63)

Chapter 4. Troubleshooting
54
Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you do not find your problem here, see Chapter 2. The following section only
describes problems that might prevent you from accessing the comprehensive
information in Chapter 2.
„ Display Problems
When I turn on the computer, nothing appears on the screen and the
computer does not beep while starting up.
Note:
If you are not sure whether you heard any beeps, turn off the computer;
then turn it on again, and listen again. If you are using an external monitor,
See “Computer Screen Problems” on page 58.
ƒ If a user password is set, enter the correct password and press Enter.
ƒ If the user password prompt does not appear, the brightness level
might be set to minimum brightness. Adjust the brightness level by
pressing Fn + .
ƒ If the screen still remains blank, make sure that:
- The battery is installed correctly.
- The AC adapter is connected to the computer and the power cord is
plugged into a working electrical outlet.
- The computer power is on. (Press the power button again for
confirmation.)
- The memory is installed correctly.
Y330 User Guide V1.0 EN (08.06.18).book Page ５４ Thursday, July 3, 2008 1:57 PM