Notice for safety and warranty information, Notice for regulatory information – Lenovo ThinkPad X120e User Manual
Page 37
To awaken your computer from Sleep (Windows 7 and Windows Vista) or
System Standby (Windows XP) mode, press Fn key on your keyboard. For more
information about these settings, see your Windows Help and Support information
system.
The Wake on LAN function is set to Enable when your Lenovo computer is
shipped from the factory, and the setting remains valid even when the computer is
in Sleep or Standby mode. If you do not need to have Wake on LAN set to Enable
while your computer is in Sleep or Standby mode, you can reduce the power
consumption and prolong the time in Sleep or Standby mode, by switching the
setting of Wake on LAN for Sleep or Standby mode to Disable. To switch the
setting of Wake on LAN, go to Device Manager and do as follows:
For Windows 7 and Windows Vista:
1. Click Start ➙ Control panel.
2. Click Hardware and Sound ➙ Device Manager.
3. In the Device Manager window, expand Network adapters.
4. Right-click your network adapter device, and click Properties.
5. Click the Power Management tab.
6. Clear the Allow this device to wake the computer check box.
7. Click OK.
For Windows XP:
1. Click Start ➙ Control panel.
2. Click Performance and Maintenance ➙ System.
3. Click the Hardware tab, and click Device Manager.
4. In the Device Manager window, expand Network adapters.
5. Right-click your network adapter device, and click Properties.
6. Click the Power Management tab.
7. Clear the Allow this device to bring the computer out of standby check
box.
8. Click OK.
Notice for safety and warranty information
The latest Safety and Warranty Guide has been uploaded on the Web site. To
refer to it, go to , and then click User Guides
& Manuals.
Notice for regulatory information
The latest Regulatory Notice has been uploaded on the Web site. To refer to it, go
to and then click User Guides & Manuals.
Appendix C. Notices
25