Lenovo B450 Notebook User Manual
Page 65
Advertising
Chapter 6. Upgrading and replacing devices
51
To make sure that the SO-DIMM is installed correctly, do as follows:
1
Turn the computer on.
2
Hold F2 during startup. The BIOS Setup Utility screen opens. The
System Memory
item shows the total amount of memory installed in
your computer.
Note:
If only one DIMM is used on the computer you are servicing, the card must be
installed in SLOT-0 (
: lower slot), but not in SLOT-1 (
: upper slot).
a
b
b
a
Advertising