Lenovo E49 Notebook - Manual (Page 73)

Applying labels to the base cover
The new base cover is shipped with a kit containing labels of several kinds.
The following illustration shows the label locations on the base cover.
1 3 4 5 2 7 6
8
9
10 11
14
13
12
When you replace the base cover, apply the following label:
6 FCC label
Note: If you replace a part with the Windows Certificate of Authentication (COA) label 1 , return the old part
with the label attached to the customer. Otherwise, you can provide the customer with a letter, stating the
original location of the label on the computer and the information on the label, such as the part number,
serial number, and product key.
The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
2 Information label 9 Asset tag
3 SYS barcode label 10 Non Encryption label
4 GEO label 11 ECC label
5 PRC label 12 Indonesia rating label
7 SIRIM label or Indonesia postel label 13 Rating label I
8 Asset tag 14 Rating label II
For some models, you need to apply two FCC labels. Check the old base cover; if it has two FCC labels,
apply both to the new base cover.
2010 LCD front bezel
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 44
• “1140 LCD unit” on page 62
Chapter 7 . Removing and replacing a FRU 67