Lenovo ThinkPad 11e User Manual
Page 72
Removal steps of the media-card-reader board
1
1
2
Step
Screw (quantity)
Color
Torque
1
M2 × L3 mm, flat-head, nylon-coated (2)
Black
0.181 Nm
(1.85 kgf-cm)
5
4
3
When installing: Ensure that the connector is attached firmly.
1090 System board assembly, dc-in connector, and thermal fan
Important notices for handling the system board
When handling the system board, read the following:
• The system board has an accelerometer, which can be broken when several thousands of G-forces
are applied.
Note: Dropping a system board from a height of as little as 15 cm (6 inches) so that it falls flat on a hard
bench can subject the accelerometer to as much as 6000 G's of shock.
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or
composite.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a
corrugated conductive material.
66
ThinkPad 11e and ThinkPad Yoga 11e Hardware Maintenance Manual