Lenovo K2450 Notebook - Manual (Page 66)

Lenovo ZhaoYang K2450 Hardware Maintenance Manual
62
1140 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• “1010 Keyboard” on page 36
• “1020 Battery pack” on page 38
• “1040 Hard disk drive” on page 42
• “1050 DIMM” on page 44
• “1060 PCI Express Mini Card for wireless LAN/WAN and SSD card” on
page 45
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1070 System board” on page 47
• “1090 LCD unit” on page 53
• “1100 Speaker, base cover, finger printer board, power assembly and LED
board” on page 55
• “1110 LCD front bezel” on page 58
• “1120 LCD panel, LCD cable and hinges” on page 59
• “1130 Integrated camera” on page 61
Figure 14. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
.
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
a
a
a