Lenovo IdeaPad S100 User Manual
Page 19
 
Chapter 2. Learning the basics
15
driver is installed, you can disconnect and reconnect the device without 
performing any additional steps. 
Before disconnecting a USB storage device, make sure your computer has 
finished transferring data by that device. Click the Safely Remove Hardware 
icon in the notification area of Windows to remove the device before 
disconnecting. 
Connecting Bluetooth-enabled devices (on select models)
If your computer has an integrated Bluetooth
®
adapter, it can connect to other
Bluetooth-enabled devices, such as notebook computers, PDAs, and mobile 
phones, and transfer data wirelessly to and from them over a range of up to 
10 meters in open areas.
Enabling Bluetooth communication on your computerr
You must enable Bluetooth communication on your computer before pairing 
your computer with other Bluetooth-enabled devices.
To enable Bluetooth communication on your computer:
1 Press Fn+F5; a list of wireless features will be displayed. 
2 Enable Bluetooth communication with a single click.
Pairing your computer with other Bluetooth-enabled devices
The first time you connect your computer to another Bluetooth-enabled 
device, you must pair the device with your computer as follows:
1 Enable Bluetooth communication on the device and set it to discoverable 
mode.
Note:
Typically, Windows detects a new device after connecting it, and then installs the 
driver automatically. However, some devices may require you to install the driver 
before connecting. Check the documentation provided by the device's manufacturer 
before connecting the device.
Note:
If your USB device uses a power cord, connect the device to a power source before 
connecting it. Otherwise, the device may not be recognized.
Note:
The actual maximum range may vary due to interference and transmission barriers. 
For the best possible connection speed, place the device as near to your computer as 
possible.
Note:
When you do not need Bluetooth communication, disable it to save battery power.
Note:
Read the documentation supplied with the device for details.