Lenovo E10-30 - Manual (Page 65)

Lenovo E10-30
61
1140 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1020 Dummy card” on page 35
• “1030 Keyboard” on page 36
• “1040 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 38
• “1050 Hard disk drive” on page 40
• “1060 PCI Express Mini Card for wireless LAN/WAN” on page 42
• “1070 Fan assembly and Heat Sink assembly” on page 44
• “1080 System board” on page 46
• “1090 LCD unit” on page 49
• “1100 Base cover, speakers, power assembly and USB board” on page 51
• “1110 LCD front bezel” on page 54
• “1120 LCD panel, LCD cable and hinges” on page 56
Figure 14. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
.
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
a
a
a