Lenovo Miix 2 10 Tablet Lenovo - Manual (Page 39)

35
Lenovo Miix 2 10
1030 3G card (on select models)
For access, remove these FRU:
• “1010 LCD cover” on page 31
• “1020 Battery pack” on page 33
Figure 3. Removal steps of 3G card (on select models)
Disconnect the two 3G card cables (blue, red)
1
. Then remove the screw
2
.
2
1
1
Step Screw (quantity) Color Torque
2
M2.0 × 2.5, flat-head, nylok-coated, 3G Module (1) Black 1.5~1.8 kgf*cm
In step
1
, unplug the jacks by using the removal tool antenna RF connector
(P/N: 51078891), or pick up the connectors with your fingers and gently unplug
them in the direction shown by the arrows.
When installing:
• In models with a 3G card that has two antenna connectors, plug the red
cable (1st) (MAIN) into the jack labeled MAIN, and the blue cable (2nd) (AUX)
into the jack labeled AUX/GPS on the card.
Remove the 3G card in the direction shown by arrow 3 .
3