Camera in – Audiovox PAV-9 User Manual

Page 19

Advertising
background image

17

CAMERA IN

SETTING THE CAMERA IN

1. Connect a back up camera video output to the AV1,2 or 3 video input terminals on the

rear of the unit.
* When the DVD changer is connected to AV3 video input, the rear view camera can be

connected only to AV1 or AV2 video input.

2. Press the MODE button to select radio mode.
3. Press the MENU button to select following picture.

4. Press the SEARCH UP/DOWN button to select CAMERA IN.
5. Press the VOLUME

or

button to select AV1,2 or 3 mode that rear view camera

is connected. Each time you press this button, AV input changes as
AV1 -> AV2 -> AV3 -> OFF

6. Press the CH

or

button to see either the normal display or 180 reversed display.

WATCHING THE BACK VIEW PICTURE

When the vehicle is put in reverse, the monitor displays the back up camera picture.

WIRING CONNECTION

Connect orange color connection wire named REVERSE GEAR to a switched power
output terminal of the R (reverse) gear. See page 26 : BASIC CONNECTIONS.

If AV input connected to the rear view camera is selected with the MODE
button, the monitor does not show the rear view camera picture. The
monitor shows only the WARNING picture.

NOTE

Advertising