Atlantis Land NETMASTER F8POE - Manual (Page 23)

23
• Compliant with 802.3af specification
• Supports PoE power up to 15.4W for PoE port
• Supports PoE power up to 30W for all PoE ports
• Supports PoE Powered Device (PD) classification identify
• Each port supports auto MDI/MDIX, so there is no need to use cross-over
cables or an up-link port
• Full/half duplex transfer mode for each port
• Wire speed reception and transmission
• Up to 1K unicast addresses entities per device, self-learning, and table
aging
• 96KBytes packet buffer
• Supports IEEE 802.3x flow control for full-duplex mode ports
• Supports Back-pressure flow control for half-duplex mode ports
3. Unpacking and Setup
This chapter provides unpacking and setup information for the Switch.
3.1 Package Contents
Unpack the package and check all the items carefully. If any item contained is
damaged or missing, please contact your local dealer as soon as possible. Also, keep
the box and packing materials in case you need to ship the unit in the future. The
package should contain the following items:
• One NetMaster F8POE Switch
• One external AC Power Supply
• Rubber footpads for Desk-mount
• One Quick Start Guide (English, Italian and French)
3.2 Installation
The setup of the Switch can be performed using the following steps:
• The surface must support at least 1.5 Kg for the Switch.
• The power outlet should be within 1.82 meters (6 feet) of the Switch.