Audiovox Movies2Go 1287962 - Manual (Page 6)

6 MMD92
Initial Use*
*When purchased the remote control
has a battery installed with a plastic insert
to prevent battery discharge. Remove the
plastic insert before attempting to use
the remote.
Battery Replacement
1. Remove the battery holder. Refer to the
drawing.
2. Insert the battery into the battery holder and
insert the battery holder into the remote. Be
sure to observe the correct polarity
3. For best results, aim the remote directly at
the remote receiver window within 10 feet,
and angles not exceeding 60 degrees.
4. The path between the remote control and
remote sensor should be free of
obstructions.
5. Under normal use the battery will last for
approximately one year.
Remote Control Operation
6. Remove the battery if the remote is
not going to be used for a long time or
during storage. The remote control
will only operate the MMD92. It is not
a universal remote control and will not
control equipment from other
manufacturers.
1287962 user manual 6-12-07.P65 6/15/2007, 1:27 PM 6