Advanced – Acer 1710 User Manual
Page 46
37
Aspire 1710
Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Description
Options
Infrared Port
Enables, disables or auto detects the infrared port.
Disabled
/Disabled/Auto
Parallel Port
Enables, disables or auto detects the parallel port.
Enabled
/Disabled/Auto
Mode
Sets the operation mode of the parallel port.
ECP
, EPP, Normal or Bi-directional
Base I/O address
Sets the I/O address of the parallel port.
378h
/278h/3BCH
Interrupt
Sets the interrupt request of the parallel port.
IRQ7
/IRQ5
DMA channel
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
DMA3
/DMA1
Legacy USB Support
Enables, disables USB interface devices support
under DOS mode.
Option:
Disabled
or Enabled