Lenovo B4400 Notebook User Manual
Page 43
Advertising
Appendix. CRU (Customer Replaceable Units) instructions
39
To make sure that the DDR3L SDRAM is installed correctly, do as follows:
1 Turn the computer on.
2 Hold F1 during startup. The BIOS setup utility screen opens. The
Installed memory
item shows the total amount of memory installed in
your computer.
Note:
If only one DDR3L SDRAM is used on the computer you are servicing, the card must be
installed in SLOT-0 (
: lower slot), but not in SLOT-1 (
: upper slot).
b
a
Advertising