Atlas Sound ATS183GS8 - Manual

MODEL SPKR POWER FREQ RESPONSE SENSITIVITY DISPERSION TRANSFORMER OVERALL WEIGHT
HANDLING DIMENSION
ATS183GL FA138 100Watts (xfmr Lmtd.) 43Hz to 20kHz (±7dB) 83.5dB 1W/1M (Half Space Ref) 360H x 50V HT327 (32 Watt) 17 5 ⁄
8
" x 17 5 ⁄
8
" x 20 7 ⁄
8
" Tall 22 Lbs.
ATS183GS FA138 100Watts (xfmr Lmtd.) 43Hz to 20kHz (±7dB) 83.5dB 1W/1M (Half Space Ref) 360H x 50V HT327 (32 Watt) 15 1 ⁄
8
" Dia. x 13 1 ⁄
8
" Tall 19 Lbs.
ATS183GL8 FA138 100 Watts 43Hz to 20kHz (±7dB) 83.5dB 1W/1M (Half Space Ref) 360H x 50V None 17 5 ⁄
8
" x 17 5 ⁄
8
" x 20 7 ⁄
8
" Tall 19 Lbs.
ATS183GS8 FA138 100Watts 43Hz to 20kHz (±7dB) 83.5dB 1W/1M (Half Space Ref) 360H x 50V None 15 1 ⁄
8
" Dia. x 13 1 ⁄
8
" Tall 12 Lbs.
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
Specifications subject to change without notice
© 2002 Atlas Sound Printed in U.S.A. 000902 ATS001386 RevB 9/02 SL1-1701
37
ONE
GARDEN SPEAKER
FEATURES
• Revolutionary two-piece design allows for two-phase installation
1. Install base
2. After construction is complete, install the speaker/transformer unit
• Choice of deep base for landscaping or shallow base for surface or shallow
bed mounting (both have easy conduit mounting positions with drill points)
• Shallow base (ATS138GS/ATS138GS8) has drill points for 4” square,
2-gang EO box, or 1-gang box on its bottom for mounting to a deck or patio
• Durable 8” coaxial speakers with a 360-degree horizontal dispersion pattern
• ATS183G(L)(S) Has convenient, externally adjustable 8, 16 and 32 watt
taps in 70 Volt configuration
• ATS183G(L)(S)8 Hi-Fidelity 8 Ohm version
• Rugged construction can support up to 250 lbs.
• Down firing speaker cannot collect dust or condensation and is protected
by triple layer grille assembly
• Available in a green finish
APPLICATION
The new Atlas Sound garden speakers, designed for theme parks, hotels, or
any architecturally landscaped area, simplify installation and deliver deep,
rich sound. The speaker is a coaxial 8”, polypropylene/kevlar cone with rub-
ber surround, 1.5” voice coil, 21 oz. magnet and a
1 ⁄
2
” mylar dome tweeter.
The Atlas Sound garden speakers are designed to blend into any environ-
ment. They are available with two different base models. One model
includes a short base for surface mounting and the other has a deeper base
for in-landscape burial. The two-piece design allows for a two-phase installa-
tion. In phase one, the base is installed. Phase two, after initial construction
is done, the system contractor can return to install the speaker/transformer.
This multiple step process protects the speakers from being damaged during
the construction/landscaping process and also eliminates the potential for
theft from the construction site. The Garden Speaker base even has a pro-
tective cover to keep debris out during construction. Inside the enclosure is a
durable 8” coaxial speaker with a great sounding 360-degree horizontal dis-
persion pattern. The enclosure is made of stable polyethylene, which
ensures performance in even the most temperamental and unpredictable
climates. The enclosure is available in green finish.
ATS183GS(8)
surface mount base and
speaker/transformer unit
ATS100GL(8)
landscape base shown
with included yellow
“under construction”
base opening protector
ATS183GL, ATS183GS
ATS183GL8, ATS183GS8
ATS183GL(8)