ATTO Technology Diamond Storage Array S-Class - Manual (Page 7)

5.5.8 Drive Configuration Commands ...........................45
ATADiskState
AutoRebuild
ClearDiskReservedAreaData
DriveCopy
DriveCopyHalt
DriveCopyResume
DriveCopyStatus
DriveInfo
DriveSledPower
DriveWipe
IdeTransferRate
LUNInfo
LUNState
QuickRAID0
QuickRAID1
QuickRAID5
QuickRAID10
RAID5ClearData
RAID5ClearDataStatus
RAIDInterleave
RAIDHaltRebuild
RAIDManualRebuild
RAIDRebuildState
RAIDRebuildStatus
RAIDResumeRebuild
RebuildPriority
ResolveLUNConflicts
RestoreModePages
SledFaultLED
VirtualDriveInfo
6.0 Configuring Drives ..........................................................................49
JBOD (Just a Bunch of Disks)
RAID Level 0
RAID Level 1
RAID Level 10
RAID Level 5
Interleave
Hot Spare sleds
Enhancing performance
6.1 JBOD .....................................................................................51
To set up the JBOD configuration
6.2 RAID Level 0 .........................................................................53
Sled-based versus disk-based
To set up RAID Level 0 groups
To remove RAID Level 0 groups
6.3 RAID Level 1 .........................................................................57
To set up RAID Level 1 groups
To remove RAID groups
Hot Spare sleds
To set up RAID Level 1 with Hot Spare sleds