Ariston DB62 - Manual (Page 7)

The MULTIFUNCTION selector is used when operating
the main oven. With the exception of the ‘O’ position
the main oven pilot light will remain on when this
selector is used. Many of the functions will also require
you to set the
MAIN OVEN TEMPERATURE before the
oven will heat up.
Turn the
MULTIFUNCTION selector control knob in
either direction to the required function:
●
Off ‘ O ’: with the selector in this position the main
oven will not heat up. The timer will still operate.
●
‘ Fan oven ’: The oven fan and a rear element are
controlled when this function is selected. Use the
main oven temperature control to set the required
temperature.
●
‘ Conventional oven ’: The top and base elements
are controlled when this function is selected. Use
the main oven temperature control to set the
required temperature.
● ‘ Half grill ’: The left hand grill elements are
controlled when this function is selected, only the
left hand side of the grill will be on. Use the main
oven temperature control to set the required
temperature.
!
Oven door must be fully open for grilling.
● ‘ Full grill ’: Both grill elements are controlled when
this function is selected, all the grill will be on. Use
the main oven temperature control to set the
required temperature.
!
Oven door must be fully open for grilling.
●
‘ Fan grill ’: The oven fan and fan grill element are
controlled when this function is selected. Use the
main oven temperature control to set the required
temperature.
!
Oven door must be closed for fan grilling.
● ‘ Fan only ’: The oven fan will operate when this
function is selected.
!
The main oven temperature control must be set to
the Off ‘ O ’ position.
●
‘ Light only ’: This function switched on the oven
light only.
! Before using your oven in the ordinary way, ALWAYS
make sure that the timer has been set to MANUAL
operation. Unless this is done, the main oven cannot
heat up. Before seeking assistance, make sure this is
done (
see Timer Operation ).
The MAIN OVEN TEMPERATURE control: This is used
in addition to the MULTIFUNCTION selector. It is used
for the functions - fan oven, fan grill, half grill and full
grill and conventional oven. Turn the control clockwise
to set the oven thermostat to the required temperature.
The Main oven pilot lights to signal that the temperature
is set correctly and the multifunction selector control is
set to a suitable function. This light will remain on until
the oven reaches the required temperature. It will then
cycle on and off as the thermostat maintains control of
the main oven temperature.
The TOP OVEN TEMPERATURE control / GRILL
selector: This is used to set the required temperature
for the top oven or to select either the HALF or FULL
grill setting depending on what you require.
The Top oven pilot lights to signal that the top oven
temperature is selected. This light will remain on until
the oven reaches the required temperature. It will then
cycle on and off as the thermostat maintains control of
the top oven temperature.
The GRILL control is used to select variable heat control
of FULL grill (both elements on together) or HALF grill
(single left hand grill on only). Turn the control to the
required setting 1 to 6.
The COOLING FAN will blow a gentle flow of air below
the control panel when any control is used. In some
instances the fan continues after switching the control off.
This is to help keep the control panel and knobs cool.
! After use always return the controls to their OFF
position "O".
The controls
Top oven
Pilot
Main oven
Pilot
GRILL
Control
TOP OVEN TEMPERATURE Control
/ GRILL Selector
Timer
MULTIFUNCTION
Selector
MAIN OVEN TEMPERATURE
Control
7
GB