Lenovo ThinkServer RD550 - Manual (Page 134)

2. Press the release button 1 to open the handle of the hot-swap hard disk drive or the dummy tray.
1
Figure 91. Opening the handle of a hard disk drive
1
Figure 92. Opening the handle of a dummy hard-disk-drive tray
3. Pull the handle and carefully slide the hot-swap hard disk drive or the dummy tray out of the front of
the chassis.
Figure 93. Removing the hot-swap hard disk drive or the dummy tray
4. Touch the static-protective package that contains the new hot-swap hard disk drive to any unpainted
surface on the outside of the server. Then, take the new hot-swap hard disk drive out of the package.
Note: Do not touch the circuit board on the hard disk drive.
120 ThinkServer RD550 User Guide and Hardware Maintenance Manual