Removing the speaker modules – Aspire Digital 5534 User Manual
Page 82
Advertising
72
Chapter 3
Removing the Speaker Modules
1.
See “Removing the Power Board” on page 70.
2.
Remove the four screws securing the Speakers to the Upper Cover.
3.
Lift the right side speaker out from the Lower Cover and peel back the mylar to expose the speaker wire
as shown.
4.
Peel back the mylar sheet to expose the speaker cable all the way to the left speaker.
5.
Remove the Speaker Cable from the cable channel. Ensure that the cable is free from all cable clips.
Step
Size
Quantity
Screw Type
Speaker Module
M2.5*3
4
Advertising