Lenovo IdeaPad Z710 Notebook - Manual (Page 40)

36
Appendix. CRU instructions
7 Hold the SATA receptacle connector with one hand and pull the hard
disk drive (secured in the metal frame) in the direction shown below to
detach it from the connector
.
8 Remove the screws and detach the metal frame from the hard disk drive.
9 Attach the metal frame to a new hard disk drive and tighten the screws.
0 Reconnect the hard disk drive (secured in the metal frame) to the SATA
receptacle connector, then carefully reinstall the hard disk drive in the
compartment with the tab facing upwards.
A Reinstall the frame fixing screw.
B Reinstall the compartment cover and tighten the screws.
C Reinstall the battery pack.
D Turn the computer over again.
E Connect the AC power adapter and the cables to the computer.
e
e