Lenovo LI2032 Wide LCD Monitor - Manual (Page 19)

Chapter 3. Reference information
This section contains monitor specifications, troubleshooting information and
instructions to manually install the monitor driver.
Mo nitor specifications
Table 3-1. Monitor specifications for type-model LI2032wA
Dimensions Height
352.1 mm (13.86 in)
Depth
Width
180.4 mm (7.10 in)
473.0 mm (18.62 in)
Stand Tilt Range: -5°, +20°
VESA mount Supported 100mmx100 mm (3.94 inx3.94 in )
Image Viewable image size 495 .3 mm(19.5 in)
Maximum height 239.76 mm(9.44 in)
Maximum width 432.00 mm (17.00 in)
Pixel pitch 0.2626 mm (0.0103 in.) (V)
Power input Supply voltage 90-264VAC (100~240VAC+/-10%)
Max supply current - 1.5 A
Power consumption
Note: Power consumption
figures are for the monitor
and the power supply
combined
Normal operation < 20 W
Standby/Suspend < 0.5W
Off < 0.5W at 100Vac & 240Vac
Video input (Analog) Input signal Analog Direct Drive, 75 ohm 0.7V
Horizontal
addressability 1600 pixels (max)
Vertical addressability 900 lines (max)
Clock frequency 205MHZ
Communications VESA DDC CI
Supported Display Modes
(VESA Standard modes
between noted ranges) Horizontal frequency 30kHZ-83kHZ
Vertical frequency 50HZ-75HZ
Native Resolution 1600 x 900 at 60 Hz
Temperature Operating 0° to 45° C (32° to 113° F)
Storage -20° to 60° C (-4° to 140° F)
Shipping -20° to 60° C (-4° to 140° F)
Humidity Operating 10% to 80% non-condensing
Storage 5% to 95% non-condensing
Shipping 5% to 95% non-condensing
Chapt er 3. 3- 1