Lenovo LI2241 Wide LCD Monitor - Manual (Page 13)

Using the On-Screen Display (OSD) controls
To ad just the settings, the user controls can be viewed through the OSD.
Brightness/Contrast
Brightness Contrast
Exit Left Right Ok
To use the controls:
1. Press to open the main OSD menu.
2. Use or
to move among the icons. Select an icon and press to access that
function. If there is a sub-menu, you can move between options using or ,
then press
to select that function. Use or to make adjustments. Press to
save.
to move backwards through the sub-menus and exit from the OSD. 3. Press
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and
allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key , Press and hold the button for
10 seconds to disable / enable DDC/CI function. The words "DDC/CI disable"
or "DDC/CI enable" shows on the screen.
Chapter 2. 2-4