Lenovo IdeaPad U300e - Manual (Page 78)

• Strengthen access controls
• Secure communications
Note: Client Security Solution is not preinstalled on your system. To download Client Security Solution,
go to http://www.lenovo.com/support.
Setting the Security Chip
The choices offered in the Security Chip submenu under the Security menu of the ThinkPad Setup are
as follows:
• Security Chip: activates, inactivates, or disables the Security Chip.
• Security Reporting Options: enables or disables each Security Reporting Option.
• Clear Security Chip: clears the encryption key.
Notes:
1. Be sure that the Supervisor password has been set in the ThinkPad Setup. Otherwise anyone can
change the settings for the Security Chip.
2. If you are using Client Security Solution, handle the Security Chip as follows:
• Do not clear the Security Chip. If you do, the functions assigned to the keys will be erased.
• Do not disable the Security Chip. If you do, Client Security Solution will not work.
3. If the Security Chip is removed or replaced, or a new one has been added, the computer will not start.
You will hear 4 cycles of 4 beeps each, or you see error message 0176 or 0192.
4. If the Security Chip is inactive or disabled, Clear Security Chip not be displayed.
5. When you clear the Security chip, be sure to turn your computer off and then turn it on again after you
set the Security chip to Active. Otherwise, the choice of Clear Security Chip is not displayed.
To set an item in the Security Chip submenu:
• Print these instructions. To set the Security Chip, you must turn your computer off and then on again.
• Save all open files, and exit all applications.
• Turn your computer off and then turn it on again.
• When the logo screen is displayed, press F1. The ThinkPad Setup opens.
• Using the cursor keys, move to Security. The Security menu opens.
• Using the cursor keys, move to Security Chip, and press Enter. The Security Chip submenu opens.
• Using the cursor keys, move to an item you want to set. When the item you want is highlighted, press
Enter.
• Set the items you want to set.
• Press F10 to exit.
• Click Yes in the Setup Confirmation window.
To set the Security Chip, you have to open the Client Security Solution, and follow the instructions on
the screen.
Note: Client Security Solution is not preinstalled on your system. To configure the security chip, you need
to download the latest version of Client Security Solution from the Lenovo Web site. To download Client
Security Solution, go to http://www.lenovo.com/support. Then follow the instructions on the screen.
62 User Guide