Konica Minolta bizhub 751 - Manual (Page 31)

How to Use the Authentication Unit 5
AU-211P 93
5.7.4 Performing Scan To Me
The following explains how to perform Scan To Me on the MFP.
!
Detail
If the correct settings are configured to use Scan To Me, [E-Mail] appears
on the Fax/Scan screen to send data to the user's e-mail address.
1
Press the [Fax/Scan] key on the control panel.
2
Press [Direct Input].
3
Press [E-mail].
4
Press [OK].
5
Specify scan conditions in [Scan Settings], [Original Settings], and
[Communication Settings].
6
Load the original and press the [Start] key on the control panel.
This scans the original and sends data to the user's e-mail address.