Konica Minolta bizhub 751 - Manual (Page 35)

How to Use the Authentication Unit 5
AU-211P 97
5.8.3 Scan to Home Related Settings
The following explains the settings required to use the Scan To Home
function.
Obtaining the Home folder position
Configure the setting to enable the user to obtain the position of the user's
Home folder from Active Directory.
Client Setting
Configure the setting to perform SMB TX.
For details on how to handle SMB TX using the PKI card and configure its
settings, refer to "SMB TX Using the PKI Card" (page 76).
2
Note
Specify the WINS server or direct hosting service to fit your environment.
For details, refer to the User's Guide [Network Administrator] supplied
together with the MFP.
5.8.4 Using Scan To Home
The following explains how to use Scan To Home on the MFP.
!
Detail
If the correct settings are configured to use Scan To Home, [Home
Folder] appears on the Fax/Scan screen to send data to the user's Home
folder.
1
Press the [Fax/Scan] key on the control panel.
2
Press [Direct Input].
3
Press [Home Folder].