Konica Minolta bizhub 751 - Manual (Page 7)

How to Use the Authentication Unit 5
AU-211P 69
!
Detail
If an incorrect PIN code is entered, "No. of Allowable Auth Failure"
appears on the screen. After 3 consecutive authentication failures the
CAC/PIV card will be locked for security reasons. For details on how to
unlock the CAC/PIV card, contact your PKI card administrator.
3
Press [OK].
This starts authentication. Successful authentication grants a user
access the MFP.
!
Detail
When Account Track is enabled, use the CAC/PIV card to perform user
authentication before account authentication. When Account Track is
enabled on the MFP that supports this system, user authentication is
forcibly associated with account authentication.
!
Detail
You can log in as a public user if Public User Access is enabled.
If logging into the MFP as an administrator or User Box administrator,
press [ID & PW], and enter the password
!
Detail
If you log into the MFP as an administrator, you can check or delete the
desired job. If you log into the MFP as a User Box administrator, you can
view the contents of all the created User Boxes regardless of whether a
password has been specified.
5.1.2 Logout
To log out the MFP, pull the CAC or PIV card out of this unit.
!
Detail
If a PKI card is used to log in to the MFP, you cannot log out by pressing
the [ID] key on the control panel.
If the MFP sub power is turned off while logging in using the PKI card, you
will be logged out of the MFP.