Konica Minolta KIP Color 80 - Manual (Page 23)

KIP Certified AutoCAD Driver
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2011 KIP.
- 23 -
Raster Photo Mode
This button is used to print the shading effects of a raster image. Some raster images are meant to be
100% solid (no tones such as a line). Others are pictures or drawings where shades are required. Select
Photo Mode to print the raster image as shades rather than 100% solid. Embedded Excel or Word
documents should have this un-selected for optimum output.
Adjustments – Monochrome Systems
Line Width Compensation
Controls line weights on a global basis. Values can be from -4.0 to +4.0. A higher value will result in all
lines increasing in thickness. A lower value will result in all lines decreasing in thickness.
Vector Line Dither
Controls dithering patterns for grayscale line entities. Values are from Fine (Tight) to Coarse (Wide)
dither patterns.
RTL Image Dither
Works in conjunction with Raster Image Control: if Raster Photo Mode is enabled, then RTL Image dither
can be controlled. Values are from Fine (tight) to coarse (wide) dither patterns. Photographic images
NOTE
This does not control vector fill areas. This should be set at the KIP