Konica Minolta bizhub 421 - Manual (Page 20)

Network Configuration 4
AU-211P 65
OCSP Responder Settings
Cert Verification Setting
In the PageScope Web Connection administrator mode, select the Security
tab, and then "Cert Verification Setting".
% In the Cert Verification Settings drop down select ON
% Check the OCSP Service box and enter the URL for the OCSP Server.
% Enter any proxy Service information only if a Proxy server is in use.
Item Description
Cert Verification Settings Select "ON" to enable certificate verification.
Timeout Enter the timeout period to check the expiration date.
OCSP Service Select this check box to use an OCSP service.
URL Enter the URL of the OCSP service (up to 511
characters).
If this item is left blank, the system accesses the URL of
the OCSP service embedded in the certificate. If the
URL of the OCSP service is not embedded in the
certificate, it will result in an error.
Proxy Server Address To check the expiration date via a proxy server, enter
the proxy server address.
If the DNS server is specified, you can enter the host
name instead.
If "IPv6" is set to "ON", you can also specify the IPv6
address.