Konica Minolta bizhub 421 - Manual (Page 16)

Network Configuration 4
AU-211P 61
4.0.5 Email Server Settings
To enable Scan to Email the folllowing settings will need to be entered. Verify
all email settings and functions with the Installation Survey and Checklist and
an IT admin.
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [Email Settings] .
% If using SMTP select Email TX (SMTP)
% Turn ON
% Scroll to page 2, select Host Address and enter the email server IP Ad-
dress. Click OK.
% If using POP select Email TX (PoP)
% Turn ON
% Select Host Address and enter email server IP Address. Click OK.
% Select S/MIME Communication Settings
% Turn ON, Click OK and Close.
4.0.6 LDAP Settings
To enable LDAP the folllowing settings will need to be entered. Verify all
settings and functions with the Installation Survey and Checklist and an IT
admin.
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [LDAP Settings] .
Item Description
DNS Server Auto Obtain Select whether to automatically obtain the DNS server
address. This item is available when using DHCPv6.
Priority DNS Server Specify the IPv6 address of the priority DNS server
associated with Active Directory.
Secondary DNS Server 1
and 2 Specify the IPv6 address of the secondary DNS server
associated with Active Directory.