7 ping confirmation test, 8 specifying cac mode or piv transitional mode – Konica Minolta bizhub 421 User Manual

Page 17

Advertising
background image

Network Configuration

4

AU-211P

62

%

Select Enabling LDAP

%

Turn ON and OK

%

Select Setting Up LDAP

%

Select a blank button

%

Select Server Name and enter the LDAP server name. For security pur-
poses a generic name can be entered.

%

Scroll to page 2, Select Server Name and enter the server IP Address

%

Select Search Base and enter the search base criteria. This information
can be found in the Installation Survey & Checklist or provide by the IT
admin. The generic criteria can be cn=users, dc=

domain name

, dc=

.com or .mil

etc.

%

Scroll to page 3 for SSL settings if needed.

%

Scroll to page 6, select domain name and enter the domain name. Click
OK and close.

4.0.7

Ping Confirmation Test

To verify the current network settings, AD server IP Address, Fully Qualified
Domain Name, DNS Server, Email Server, LDAP etc, perform the following
Ping test from the MFP.

On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [Forward] - [Detail Settings] -
[Ping Confirmation].

%

Host Address enter the IP Address for the DNS server, LDAP server
and Email server. Select Check Confirmation.

If successful move on to the next test below, if unsuccessful confirm
addresses with IT Admin, confirm blocked/unblocked ports, firewalls,
routers, etc.

%

Host Address enter the Domain Name and Check Confirmation. Per-
form this test 5 or more times in a row. If the address fails one or more
times a change to the soft switch settings will be needed.

4.0.8

Specifying CAC Mode or PIV Transitional Mode

Originally the DoD used a CAC card exclusively, recently the DoD has
introduced a CAC card with PIV transition, so there may be CAC
enivironments with just CAC or CAC and CAC with PIV Transition cards
mixed together. The CAC/PIV PKI solution has the ability to be configured to
handle both types of cards. You will see that the PIV mode is default. This
setting will allow for both cards. Start with this setting and move to CAC only
if any login issues persist. The CAC settings will allow for CAC card only.

Advertising
This manual is related to the following products: