3 before installation begins – Konica Minolta bizhub 421 User Manual
Page 7
Getting Started
2
AU-211P
9
2.3
Before Installation Begins
This installation process must be completed by a trained Konica Minolta
Service Technician and/or Network Engineer. Before beginning this
installation procedure the individual performing this install must meet the
technical requirements and complete the on-line training module. Please
refer to the service training area of the Learning Place.
Before the installation process begins it is mandatory that the following
Prerequisite Checklist is completed.
Prerequisite Checklist:
0
CAC/PIV compatible bizhub MFP
0
USB Host Kit for color bizhub MFPs (USB is preinstalled on B&W
MFPs)
0
Working Table for bizhub MFP
0
AU-211P CAC/PIV USB Card Reader
0
KM CAC/PIV Firmware (CF Card) for the compatible MFP.
0
A USB Thumb Drive containing the AU-211P loadable driver files
0
Completed CAC/PIV Solution Installation Survey & Checklist
0
Access to a valid CAC or PIV card
Once the checklist is completed the installation proces can begin starting
with the Firmware installation.
!
Detail
The AU-211P Loadable Drivers MUST be downloaded from MyKonica
Minolta.com and loaded to a USB Thumb Driver before the installation
process begins.