Konica Minolta BIZHUB C360 - Manual (Page 189)

bizhub C360/C280/C220 12-42
12.11 Banner printing function 12
2
Open the window for registering a custom size.
% For Mac OS X 10.4/10.5, select [Manage Custom Sizes...] from the Paper Size list.
% For Mac OS X 10.2/10.3, select [Custom Paper Size] from [Settings:].
3
Click [+] (OS X 10.4/10.5) or [New] (OS X 10.2/10.3).
4
Enter the paper size name.
% Be sure to use paper size names other than existing names, such as A4 and Custom.
5
Configure the following items.
% Page Size (Paper Size): Specify the desired banner size.
This value must be in the allowable range of banner size (paper width: 8-1/4 to 11-11/16 inches (210
to 297 mm), paper length: 18 to 47-1/4 inches (457.3 to 1200 mm)).
% Printer Margins: Specify the paper margins.
6
Click [OK] for OS X 10.4/10.5, or click [Save] for OS X 10.2/10.3.
The custom paper size is then registered.
7
Select the created custom paper size from the paper size in [Page Attributes]. For Mac OS X10.5, you
can also select the paper size from [Paper Size:] on the Print window.
8
Select [Print] in the [File] menu to display the Print window.
9
Check that [Paper Tray:] in [Paper Tray / Output Tray] is set to "Bypass Tray" and [Paper Type:] is set
to the desired paper type ("Thick 1 to Thick 3" etc.), and also they are grayed out to prevent them from
being changed.
% If [Paper Type:] is invalid, specify the paper type in [Paper Settings for Each Tray...].
% If the specified paper size is not in the allowable range of the banner size, [Paper Tray:] or [Paper
Type:] is not grayed out to enable you to change them. In this case, check the setting of the custom
paper size.
10
If necessary, specify other items, and click [Print].
Reference
- If the specified paper size or paper type is not in the allowable range of the banner size, an error mes-
sage is displayed when printing, or the job is discarded, resulting in a printing failure.