Konica Minolta BIZHUB C360 - Manual (Page 106)

bizhub C360/C280/C220 9-16
9.4 Parameter details 9
Reference
- The [Staple] function is available only if the optional Finisher FS-527 or Finisher FS-529 is installed.
- The [Punch] function is available only when the Punch Kit is installed on the optional Finisher FS-527.
- The [Center Staple and Fold] and [Fold] functions are available only when the Saddle Stitcher is in-
stalled on the optional Finisher FS-527.
9.4.5 [Cover Mode] tab
[Output Tray] Default, Tray 1 and Tray
3 Specify the tray to output the printed pages.
Selectable items vary depending on the option installa-
tion status.
[Paper Arrange-
ment] [Prioritize Arranging Pa-
pers]/[Prioritize Produc-
tivity] Specify the method for paper arrangement (adjusting
the binding position) for 2-sided printing. When [Priori-
tize Arranging Papers] is selected, the paper arrange-
ment process is performed after receiving all data.
When [Prioritize Productivity] is selected, the paper ar-
rangement process is performed while receiving and
printing data.
Function Name Option Description
Function Name Option Description
[Front Cover] ON/OFF, [Blank]/[Print] Select this check box to attach a front cover page.
It can be specified when any other option than [Auto] is
selected for Paper Tray.
[Front Cover Tray] Tray 1 to Tray 4, LCT, By-
pass Tray Select the paper tray for the front cover sheet.
Selectable items vary depending on the option installa-
tion status.
[Back Cover] ON/OFF, [Blank]/[Print] Select this check box to attach a back cover page.
It can be specified when any other option than [Auto] is
selected for Paper Tray.
[Back Cover Tray] Tray 1 to Tray 4, LCT, By-
pass Tray Select the paper tray for the back cover sheet.
Selectable items vary depending on the option installa-
tion status.
[Per Page Setting] ON/OFF Select this check box to insert paper between pages
and switch the paper and tray for each page. [Edit
List...] allows you to create a list specifying conditions
on a page basis.