Konica Minolta BIZHUB C360 - Manual (Page 17)

bizhub C360/C280/C220 2-4
2.1 Printer controller 2
2.1.3 Control panel
The printer driver settings are mainly configured on the computer. However, printing the font list and config-
uring the printer controller settings and default print settings are available using the control panel of this ma-
chine.
The following describes the important keys used for the printer function.
No. Name Description
1 Touch Panel Various screens and messages are displayed.
Configure various settings by directly pressing the touch
panel.
2 Utility/Counter Press this key to display the [Utility] screen and the Meter
Count screen.
3 Reset Press this key to reset all settings (except programmed set-
tings) entered using the control panel or touch panel.
4 Proof Copy Press this key to perform proof printing when a proof print job
is stored.
5 Start Press this key to start the operation of the selected function.
When this machine is ready to begin the operation, the indi-
cator on the Start key lights up in blue. If the indicator on the
Start key lights up in orange, the operation cannot begin.
6 Data Indicator Flashes in blue while a print job or fax is being received.
Lights up in blue when a print job or fax is queued to be print-
ed or while it is being printed.
7 C (clear) Press this key to erase a value entered using the keypad or
characters entered from the keyboard on the screen.
8 Keypad Press to enter numbers. Use the keypad to enter the admin-
istrator password or other setting values.
1
2
3
8 7 4 6 5
10
11
12
9