Konica Minolta BIZHUB C360 - Manual (Page 46)

bizhub C360/C280/C220 5-9
5.1 Windows Vista/Server 2008 5
Once the settings for the printer have been configured, you can use the printer in the same way as a general
local printer.
5.1.3 For network connection (Web service print)
In Windows Vista/Server 2008, printers supporting the Web service print function on the network can be lo-
cated and installed.
d
Reference
To install a different printer driver in the computer where one has already been installed, you must uninstall
the currently installed one along with its package. For details, refer to page 8-3.
Settings for the machine
To use the Web service print, you must configure the network settings for the machine in advance.
d
Reference
For details on the network settings for the machine, refer to the [User's Guide Network Administrator].
Installing the printer from the Network window
0 Installing the driver to Windows Vista/Server 2008-based computers requires the administrator author-
ity.
1
Turn on the power of the machine while it is connected to the network.
Since the printer is searched for during the installation, be sure to connect the machine to the network.
2
To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing Cent-
er] on the computer.
3
Insert the printer driver CD-ROM for Windows into the CD-ROM drive of the computer.
4
Press the [Start] key, and then select [Network].
The [Network] window appears, starting to search for the computers and devices on the network.
5
Select the device name of the machine, and then click [Install] on the toolbar.
% If the [User Account Control] window appears, click [Continue].
A printer compatible with the selected Web service print function is located, and then the [Found New
Hardware] dialog box appears.
6
Follow the instructions on the pages that follow.
% If the [User Account Control] window appears, click [Continue].
% If the [Windows Security] window for verifying the publisher appears, click [Install this driver soft-
ware anyway].
d
Reference
The operating steps in the [Found New Hardware] dialog box are the same as those described in "Installing
the printer driver by specifying the IP address using the Add Printer Wizard". For details, refer to Steps 11
through 20 in the succeeding section.
Items to be configured Description
IP address In [TCP/IP Settings] of the machine, specify the IP address.
Web Service Settings In [Web Service Settings] for the machine, enable the print function.