Konica Minolta BIZHUB C360 - Manual (Page 68)

bizhub C360/C280/C220 6-2
6.1 Mac OS X 10.2/10.3/10.4/10.5 6
6 Installation on Macintosh Computers
This chapter describes the settings necessary when using Macintosh and the procedure for installing printer
drivers for Macintosh.
6.1 Mac OS X 10.2/10.3/10.4/10.5
6.1.1 Installing the printer driver
1
Start the Macintosh computer.
2
Insert the printer driver CD-ROM for Macintosh into the CD-ROM drive of the computer.
% Exit all running applications, if any.
3
Open the folder in the CD-ROM that contains the desired printer driver.
% Select a folder according to the printer driver, operating system, and language to be used.
4
Copy the driver file onto the desktop according to the Mac OS version.
% OS X 10.2: bizhub_C360_102.pkg
% OS X 10.3: bizhub_C360_103104.pkg
% OS X 10.4: bizhub_C360_103104.pkg
% OS X 10.5: bizhub_C360_105.pkg
% For OS X 10.5, the driver folder varies depending on the paper size. Select the appropriate driver
folder for your environment.
To use metric-based paper size (A4 and the like): Select a file in "WW_A4" folder.
To use inch-based paper size (8 1/2 e 11 in letter size): Select "WW_Letter" folder.
5
Double-click the file copied onto the desktop.
The installer starts.
% To cancel installation, press [Cancel].
6
Click [Continue] following the instructions on the pages that follow until the [Installation] page appears.
% When the name and password prompt appears during the procedure, enter the administrator name
and password.
7
In the [Installation] page, click [Install].
The printer driver is installed in the computer. When the installation is completed, a message appears.