Configuring the rendezvous settings – Konica Minolta BIZHUB C360 User Manual

Page 76

Advertising
background image

bizhub C360/C280/C220

6-10

6.1

Mac OS X 10.2/10.3/10.4/10.5

6

6.1.3

Selecting and connecting a printer (OS X 10.2/10.3)

In OS X 10.2/10.3, the printer can be connected with Rendezvous, AppleTalk, LPR (LPD), or IPP.

After configuring the network setting for the machine, selecting this machine as the printer to be used in
[Printer Setup Utility] or [Print Center] enables printing.

Configuring the Rendezvous settings

Configuring the [Bonjour Setting] for the machine

Enable Bonjour in [Bonjour Setting] for the machine, and then enter the Bonjour name.

d

Reference

For details on the [Bonjour Setting] for the machine, refer to the [User's Guide Network Administrator].

Adding a printer

1

Select [Macintosh HD] - [Applications] - [Utilities] where the driver has been installed, and then double-
click [Printer Setup Utility] or [Print Center] to open it.

2

When the [You have no printers available. ] window appears, click [Add]. When the [Printer List] ap-
pears, click [Add].

% If available printers have already been specified, the [You have no printers available. ] window does

not appear.

3

Select [Rendezvous] for the connection method.

Connected printers are detected.

% If no printer is detected, turn this machine off, then on again.

In this case, turn off this machine, and then wait approximately 10 seconds before turning it on
again. If you turn the printer on immediately after turning it off, it may not function correctly.

4

From the [Name] list, select the desired model name.

The printer driver corresponding to the selected printer name is automatically selected.

% After the printer driver is selected, go to Step 6.

% If an incorrect printer driver is selected, go to Step 5.

Advertising
This manual is related to the following products: