Konica Minolta bizhub 4750 User Manual
Page 58
[Quick Start Guide]
5-23
5.6
Registering a destination
5
Basic
Us
age
Chap
te
r 5
[WebDAV]
[Connection]
Register information of the destination FTP server.
[Host Name]
Enter the host name or IP address of the destination FTP server (using up to
253 bytes).
•
Example of host name entry: "host.example.com"
•
Example of IP address (IPv4) entry: "192.168.1.1"
•
Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path]
Enter the name of the storage folder in the FTP server specified in [Host Name]
(using up to 127 bytes).
•
Entry example: "scan"
When specifying a folder in the FTP folder, insert a symbol, "/", between the
folder names.
•
Entry example: "scan/document"
When the file path is not specified, only enter the "/".
•
Entry example: "/"
[User ID]
If authentication is required in the destination FTP server, enter the available
user name to log in (using ASCII characters of up to 63 bytes).
[Password]
Enter the password (using up to 63 bytes).
[Detail Setting]
Configure settings to establish communications with the FTP server.
•
[Port No.]: If necessary, change the port number. Normally, you can use the
original port number. [21] is specified by default.
•
[Pasv]: When the PASV mode is used in your environment, select [ON]. [ON]
is specified by default.
•
[Proxy]: When a proxy server is used in your environment, select [ON].
[OFF] is specified by default.
Settings
Description
[No.]
Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name]
Enter the destination name (using up to 72 characters).
[Favorite]
Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorite], enabling you to easily specify a destination.
[Index]
Select a corresponding character so that the destination can be index
searched by name.
[Connection]
Register information of the destination WebDAV server.
[Host Name]
Enter the host name or IP address of the destination WebDAV server (using up
to 253 bytes).
•
Example of host name entry: "host.example.com"
•
Example of IP address (IPv4) entry: "192.168.1.1"
•
Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path]
Enter the name of the storage folder in the WebDAV server specified in [Host
Name] (using up to 96 bytes).
•
Entry example: "scan"
When specifying a folder in the WebDAV folder, insert a symbol, "/", between
the folder names.
•
Entry example: "scan/document"
[User ID]
Enter the name of a user who has privileges to access the folder specified in
[File Path] (using up to 63 bytes).
[Password]
Enter the password (using up to 63 bytes).
[Detail Setting]
Configure settings to establish communications with the WebDAV server.
•
[Port No.]: If necessary, change the port number. Normally, you can use the
original port number. [80] is specified by default.
•
[Proxy]: When a proxy server is used in your environment, select [ON].
[OFF] is specified by default.
•
[SSL Setting]: When SSL is used in your environment, select [ON]. [OFF] is
specified by default.
Settings
Description