Konica Minolta bizhub 4750 - Manual (Page 15)

2-6 [Quick Start Guide]
About power supply 2 2.2
O
v
er
vie
w
o
f
Th
is Ma
ch
in
e
Chapter 2
2.2.2 Turning the Power Switch ON or OFF
1
When turning the main power on, press n of the Power Switch.
A screen appears to show that this machine is in the process of start-up.
When the main menu icon is displayed, this machine is ready to use.
2
When turning the main power off, press o of the Power Switch.
NOTICE
When restarting this machine, turn the
Power Switch off and on again after 10 or more seconds have elapsed.
Not doing so may result in an operation failure.
2.2.3 Using the Power key
Press the Power key to switch this machine to Power Save mode.
You can select [Power Save] or [Sub Power OFF] as Power Save mode that is activated when the Power key
is pressed.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Set-
tings] - [Power Save Key] (The default varies depending on the region the machine is used in.)
When using the Power key as a Power Save key
When the Power key is pressed, the status of this machine changes as shown below. Depending on how
long the Power key is pressed, the state of the power saving mode to be activated will differ.
Power key Status of
this ma-
chine Status of
LED Description
Short press Low Power
mode
(Default) Flash:
Blue Turns off the display of the Touch Panel to reduce pow-
er use.
This machine returns to Normal mode when it receives
data or faxes or when the user operates the Touch Pan-
el.
Sleep mode Flash:
Blue Provides a greater power saving effect than Low Power
mode. The time required to return to Normal mode is
longer than that from Low Power mode.
This machine returns to Normal mode when it receives
data or faxes or when the user operates the Touch Pan-
el.