Konica Minolta bizhub 4750 - Manual (Page 33)

4-2 [Quick Start Guide]
Preparation for network connection (for administrators) 4 4.1
Initial Settings
o
f Th
is
M
ach
in
e
Cha
p
te
r 4
4 Initial Settings of This Machine
4.1 Preparation for network connection (for administrators)
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 2-3.
Assigning an IP address
If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-
dress.
In the Control Panel, select [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IPv4
Settings], then configure the following settings.
Tips
To check the IP address assigned to this machine, print out the Configuration Page. To print out the Config-
uration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Configuration Page].
Settings Description
[IP Address] When manually specifying the IP address, enter the fixed IP address assigned
to the machine.
[Subnet Mask] When manually specifying the IP address, enter the subnet mask.
[Default Gateway] When manually specifying the IP address, enter the default gateway.
[IP Application Method
Auto Setting] When automatically specifying the IP address, select the method for automatic
retrieval.
•
[DHCP Settings]: [ON] is specified by default.
• [BOOTP Settings]: [OFF] is specified by default.
• [ARP/PING Settings]: [OFF] is specified by default.
• [AUTO IP Settings]: Fixed to [Enable].