Konica Minolta bizhub 4750 - Manual (Page 42)

[Quick Start Guide] 5-7
5.1 Using the print function (Windows environment) 5
Basic
Us
age
Chap
te
r 5
5.1.4 Initial settings of the printer driver
When you use this machine for the first time, configure the printer driver so that it contains information such
as what options are installed on this machine and whether or not authentication settings have been config-
ured.
1
Display the printer window.
% In Windows 8.1, click [ ] in the Start window, then click [Control Panel] - [Hardware and Sound] -
[View devices and printers].
% In Windows 8, right-click the Start window, then click [All apps] - [Control Panel] - [Hardware and
Sound] - [View devices and printers].
% In Windows Server 2012/Server 2012 R2, open the Start window, then click [Control Panel] - [Hard-
ware] - [View devices and printers].
% In Windows 7/Server 2008 R2, open the Start menu, then click [Devices and Printers].
% In Windows Vista/Server 2008, click the Start menu, and select [Control Panel] - [Hardware and
Sound] - [Printers].
% In Windows Server 2003, click the Start menu, then select [Printers and Faxes].
2
Open the printer properties.
% In Windows 7/8/8.1/Server 2008 R2/Server 2012/Server 2012 R2, right-click the icon of the installed
printer, and from [Printer properties], click the displayed printer name.
% In Windows Vista/Server 2003/Server 2008, right-click the icon of the installed printer, then click
[Properties].
The [Properties] window appears.
3
In the [Configure] tab, configure the information such as what options are installed on this machine and
whether or not authentication settings have been configured.
% By default, [Auto] in [Acquire Settings...] is enabled. The information on this machine is automatically
obtained and reflected to [Device Option].
% When [Auto] in [Acquire Settings...] is disabled, clicking [Acquire Device Information], obtains and
reflects the information on this machine to [Device Option].
% If you cannot communicate with this machine or you are using a USB connection in Windows Server
2003 environment, manually configure a setting in [Device Option]. Select the item to change from
the list, and set a value in [Setting].
4
Click [OK].