Konica Minolta Magicolor 5570DNX - Manual (Page 19)

Using Crown Print Monitor+ 19
8
Configure the Timers, the Audible Alert, and the Output Bin Notification.
Options are described in “Port Configuration Options” on page 17.
9
Choose OK.
10
Close the Print Servers Properties dialog box.
Using Crown Print Monitor+
If you have installed Crown Print Monitor+, added a port for the printer, and
configured the port settings, if necessary, you are ready to use Crown Print
Monitor+.
Windows XP/2000/NT4
To obtain status information on a print job, from the Start menu choose Set-
tings and then Printers, then double-click on the printer you have selected.
Whenever a print job is sent to that port, its status is reported in the sample
status window shown below.
Print Job Status Information
This provides a sample of what should appear in the status window once you
have set up Crown Print Monitor+.
The following is an explanation of the status window prompts:
Menu or Item Explanation
Printer Provides a drop-down menu that allows you to select Con-
nect, Set as Default Printer, Printing Preferences, Pause
Printing, Cancel All Documents, Sharing, Use Printer Offline,
(Printer) Properties, and Close.
Document Allows you to Pause, Resume, Restart, Cancel, or view the
(Document) Properties of one or more print jobs.
View Allows you to view or hide the Status Bar and Refresh print
job information.
Help Provides access to Help Topics, the printing Troubleshooter,
and information About Windows.