Konica Minolta bizhub 42 - Manual (Page 99)

bizhub 42/36 7-5
7.2 WIA-compatible application 7
7.2 WIA-compatible application
The following is the procedure for basic scanning.
d
Reference
For the settings you must configure in advance, refer to page 4-5.
1
Start the WIA-compatible application to be used for scanning.
2
Start the scanner driver according to the application settings.
3
Configure scan settings and then click [Scan].
Item Description
Paper source Select whether to place originals on the Original Glass (Flatbed) or ADF
(Document Feeder).
Color picture Select this setting when scanning in color.
Grayscale picture Select this setting when scanning in grayscale.
Black and white picture
or text Select this setting when scanning in black and white.
Custom Settings Select this setting to scan with the setting values in Advanced Properties
screen.
Adjust the quality of the
scanned picture Click this message to display the Advanced Properties screen. In the Ad-
vanced Properties screen, settings can be specified for [Brightness], [Con-
trast], [Resolution(DPI)], and [Picture type] (select from color, grayscale or
black and white).
These settings are applied when [Custom Settings] is selected.
Page size Specify the paper size. Applies only when [Page source] is set to [Document
Feeder].
Preview window Displays a preview image. Drag the rectangle over the image to select an ar-
ea.
Preview Click to begin scanning a preview image.
Scan Click to begin scanning.
Cancel Click to close the WIA driver window.