Konica Minolta IC-601 - Manual (Page 78)

IC-601 6-15
6.4 Transmission to the FTP Server 6
% If you input an address manually, refer to page 6-16.
4
Press [Scan Settings].
5
Configure the necessary items.
% For more information on the configurations on the Scan Settings screen, refer to page 6-34.
% Press [File Name] if you want to specify the file name.
6
Set an original and press [Start].
The original is scanned, and the scanned data are stored in an specified address.
% Press [Address] to return to the Select Addresses screen.
% The settings specified in the Scan Settings screen and address selected in the Select Addresses
screen may be left until it is restarted. It is recommended to release the setting and address once
the operation is completed.
You can release the setting by pressing [Reset] on the Control Panel when the Scan Settings screen
is displayed. You can also release the address by pressing [Address] to return to the Select Ad-
dresses screen and then pressing [Clear All] or [Reset] on the Control Panel.